R-Tech PLASMA P31C Operation Instructions Manual page 3

Thank you for selecting the R-Tech Plasma 31C Inverter Plasma Cutter
The Plasma 31C has many benefits over traditional transformer plasma cutters, including infinite
power control, HF contact start and quick fitting cost effective torch, long-life cost-effective torch
consumables and a 35% industrial duty cycle
We want you to take pride in operating our Plasma 31C as much pride as we have taken in making
this product for you. Please read all information in this manual before operation
PLEASE EXAMINE CARTON AND EQUIPMENT FOR DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser upon receipt from the courier.
Consequently, all claims for material damaged in shipment must be made by purchaser against
the transportation company used.
Please record your equipment identification below for future reference. This information can be found on
data plate at rear of machine.
Product Plasma P31C
Serial No.
Date of Purchase
Where Purchased
Whenever you request replacement parts or information on this equipment, please always
supply information you have recorded above
This product is covered by 3 years parts and labour warranty, we will cover cost of collecting and
returning item to you (UK mainland only, other areas are RTB). External items, torch, earth lead etc. are
covered by 3 months warranty. Any faults/damage found caused by customer will be charged pro-rata
Pay particular attention to the safety instructions we have provided you for your protection
The level of seriousness to be applied to each section is explained below
WARNING
This statement appears where the information must be followed exactly to avoid serious personal injury.
CAUTION
This statement appears where the information must be following to avoid a minor personal injury or
damage to this equipment.
3