New Holland FR450 TIER 3 Service Manual page 73

64. On the left-hand side, install the sensor bracket (2).
Use the hardware (1).
65. Install the exhaust tube (23) on the muffler (24).
66. Install the clamp (30). Use the hardware (29).
67. Install the coolant tank (19).
68. Connect the hose (20), (21), and (22) to the coolant
tank (19).
69. Check if all the coolant lines are connected and tight-
ened.
70. Refill the coolant in the cooling system. Refer to
the Operator's Manual Engine cooling system -
Replace (10.400).
71. Near the coolant tank, connect the connectors in-
volved. Connect the coolant level sensor wire (105)
attached at the top.
72. Check all the hydraulic connections.
Engine - Engine and crankcase
47812470 23/02/2015
10.1 [10.001] / 36
55
ZEIL13FR00305AB
56
ZEIL13FR00306AZ
57
ZEIL11FR0031A0B
58
ZEIL13FR00307AB