Table of Contents
Advertisement
Engine and crankcase - Remove
SP.240R
SP.275R
DANGER
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply will result in death or serious injury.
CAUTION
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in minor or moderate injury.
WARNING
Improper operation or service of this machine can result in an accident.
Before working on any component(s) of the electrical circuit, put the ignition key in the off (shut down)
position. When disconnecting batteries, always disconnect the negative (-) cable first. When recon-
necting batteries, always connect the negative (-) cable last.
Failure to comply could result in death or serious injury.
WARNING
Improper operation or service of this machine can result in an accident.
Before working on any part of the electrical system, disconnect the battery ground cable. Complete
all electrical work before connecting the cable.
Failure to comply could result in death or serious injury.
Move the sprayer to a hard and level surface.
Turn the sprayer key to the "OFF" position.
Prior operation:
Remove the hood Engine hood - Remove (90.105).
Prior operation:
Remove the cooling package Engine cooling system - Remove — Cooling package (10.400).
Prior operation:
Remove the fan and drive Fan and drive - Remove — Fan (10.414).
Prior operation:
Remove the fan shroud Fan and drive - Remove — Fan shroud (10.414).
Prior operation:
Remove the air cleaner assembly Air cleaner - Remove — Air cleaner assembly (10.202).
Engine - Engine and crankcase
47657030 01/04/2014
10.1 [10.001] / 3
D0076A
C0104A
W0943A
W0137A
Advertisement
Table of Contents
