Renault Kangoo Manual page 161

WHEEL TRIMS
3
2
Wheel trim 1
(concealed wheel bolts)
Remove it using hubcap tool 3
(located next to the jack), or the end
of the wheel brace, by inserting the
hook into the hole.
To refit it, reclip it in position
ensuring that it is aligned with mark
2.
5.04
4
1
5
Wheel trim 5
(concealed wheel bolts)
Remove it using hubcap tool 3
(located next to the jack), by
inserting the hook in the slot
provided.
When refitting the wheel trim, align
it with valve 4.
Push the retaining hooks in, starting
with valve side A, followed by B
and C, finishing at the side opposite
the valve D.
B
A
D
C
6
Wheel trim 6
(exposed wheel bolts)
To remove it without removing the
wheel, press it at the
indicated by the arrows.
Turn it so that the retaining brackets
holding it in place behind the wheel
bolts are released.
To refit the hubcap, proceed in
reverse order.
points