Rear Bench Seat - Renault Kangoo Manual

REAR BENCH SEAT (features)
1
To fold down the bench seat
Move one of the two levers 1 on the
right or left-hand side of the bench
seat forwards.
For a single section bench seat and
seatback, arrange the centre belt flat
on the seat base before folding down
the seatback.
3.24
2
For the split bench
seatback, place the headrests in the
storage position, then fold back the
smaller section of the seatback first
followed by the larger section.
Lift the rear seat base towards the
front by pulling the two rings 2, one
after the other.
Fold the seat base and the seatback
into a vertical position.
We would advise you to move the
front seats forward slightly to make
it easier to fold down the seatback
with the headrests in position.
Make sure the headrests are in the
correct position when the seat is
returned to its upright position.
seat and