Gtech MULTI ATF Series Operating Manual page 12

Before checking for a blockage, remove the
battery.
The brush bar can now be removed, starting at
the button end.
12
5011_System_UF_manual_aw.indd 12 5011_System_UF_manual_aw.indd 12
Rest the product on its side and locate
the brush bar button on the right hand side.
Press the button inwards and then pull
the brush bar out from the bottom of
the product.
To remove hair from the brush bar, run the hair
removal tool down the groove to cut the hair,
then use the comb remove it.
Never operate the product without the brush
bar in place.
18/05/2021 16:45 18/05/2021 16:45