• The charger must be removed from the • Only use batteries and chargers supplied socket before removing the battery, by Gtech. cleaning or maintaining the appliance. • Never modify the charger in any way. • Ensure the appliance is off before connecting or disconnecting the motorised brush bar.
• Never modify the appliance in any way as this may increase the risk of personal injury. • Only use replacement parts or accessories provided or recommended by Gtech. 4603_Multi_manual_2020_aw2.indd 3 4603_Multi_manual_2020_aw2.indd 3 19/01/2021 10:53 19/01/2021 10:53...
Thank you for choosing Gtech “Welcome to the Gtech family. I started Gtech to create sensible, easy to use products that do a great job, and hope you get many years of trouble-free performance from your new product.” Nick Grey –...
Operation The dusting brush can be slotted onto the Press the button above the handle to turn the active nozzle. The crevice tool is stored on product on and off. board the product for easy access. An active nozzle is built into your Multi. The dusting brush, crevice tool, extension tube and power brush all attach to the active nozzle.
Power brush Make sure the terminals on the Power Brush Gently pull the Power Brush from the product and Active nozzle are correctly lined up and to remove. The battery should be removed gently push the Power brush onto the Active when changing attachments.
Battery charging When a single green light flashes, recharge The battery can be charged on or off the main the battery. unit. hour hours boost After 4 hours, the LEDs turn solid green and It is OK to charge for 1 hour for a burst charging is complete.
State of Charge 100% - 75% 75% - 50% 50% - 25% 25% - 1% The battery state of charge indicator shows While the battery is on charge, the LEDs will how much charge the product has. As you use pulsate and in turn illuminate.
Wash the filter if Recommended water temperature 40ºC. Do necessary. not use any detergent or soaps. (You can buy more at www.gtech.co.uk) Never put the bin back without the filter inside. You could damage the motor.
Press the green buttons and pull to remove the battery. The battery can be charged on or off the main unit. If you want to buy a spare battery go to www.gtech.co.uk or call 08000 308 794 . 4603_Multi_manual_2020_aw2.indd 10 4603_Multi_manual_2020_aw2.indd 10...
If these initial tips do not solve your problem we please visit our support area where you can find troubleshooting help including online manuals, FAQs and how-to-videos, as well as genuine spares and replacement parts compatible with your product. Visit: www.gtech.co.uk/support Online Live chat support support@gtech.co.uk...
If your product is within its warranty and has a fault that cannot be resolved from the troubleshooting section or online support, please do the following: • Contact our Gtech Customer Care Helpline on UK: 08000 308 794, who will go through any troubleshooting with you to identify the fault.
Page 13
symbol indicates that this product is Call your local council, civic amenity site, or recy- covered by legislation for waste electrical and cling centre for information on the disposal and electronic products (2012/19/EU) recycling of electrical products. Alternatively visit www.recycle-more.co.uk for advice on recycling When the product has reached the end of its life, it and and to find your nearest recycling facilities.
Need help?
Do you have a question about the MULTI MK2 ATF Series and is the answer not in the manual?
Questions and answers