Cleaning The Filters - Gtech MULTI ATF Series Operating Manual

Cleaning the filters -

Holding onto the head with one hand, pull the
bin handle and lift the bin out of the product.
Remove the filter from the inner shroud,
by twisting and pulling.
Tap the inner shroud over a bin to remove any
excess dirt.
10
5011_System_UF_manual_aw.indd 10 5011_System_UF_manual_aw.indd 10
do this once a month or more frequently depending on use.
Pull the filter out of the filter housing.
Tap the dirt from the filter and tip any
dirt from the filter housing.
Wash the filter if necessary.
Wash the filter under a tap. Squeeze out any
excess water then let it dry completely
before reinserting into the product.
Recommended water temperature 40°C.
Do not use detergent or soaps. Never put
the bin back without filter inside. You
could damage the motor.
18/05/2021 16:45 18/05/2021 16:45