Remote Control Unit - Canon LV-7292S User Manual

①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
LV-RC07
① POWER button
Turn the projector on or off. (pp.21-23)
② AUTO SET button
Execute the setting of Auto setup (includes
Auto input and Auto PC functions) in the
setting menu. (pp.26, 47)
Note:
To ensure safe operation, please observe the
following precautions:
– Do not bend, drop or expose the remote control unit
to moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any chemical material.
Part Names and Functions
Remote Control Unit
③ COMPUTER button
Select the COMPUTER input source.
(pp.29, 39)
④ VIDEO button
Select the VIDEO input source. (p.38)
⑤ S-VIDEO button
Select the S-VIDEO input source. (p.38)
⑱ ⑥ Point ▲▼◄► buttons
– Select an item or adjust the value in the
⑰
On-Screen Menu. (p.24)
– Pan the image in the Digital zoom +/-
mode. (p.37)
⑦ ASPECT button
Select a screen mode. (pp.28,36-37,44-45)
⑯
⑧ MENU button
Open or close the On-Screen Menu. (p.24)
⑮
⑨ FREEZE button
⑭
Freeze the picture on the screen. (p.27)
⑬
⑩ BLANK button
⑫
Temporarily turn off the image on the screen.
(p.28)
⑪ D .ZOOM +/- buttons
Zoom in and out the images. (pp.27, 37)
⑫ IMAGE button
Select the image mode. (pp.28, 34, 41)
⑬ P-TIMER button
Operate the P-timer function. (pp.28, 52)
⑭ LAMP button
Select a lamp mode. (pp.27, 54)
⑮ INFO. button
Operate the information function. (p.59)
⑯ KEYSTONE button
Correct keystone distortion. (p.26)
⑰ OK button
– Execute the selected item. (p.24)
– Zoom in or out the image in Digital zoom
mode. (p.37)
⑱ COMPONENT button
Select the COMPONENT input source. (p.39)
13