Nbdp Transmitting, Receiving; Manual Calling - Furuno FS-1570 Operator's Manual

11 NBDP TRANSMITTING,
RECEIVING
This chapter mainly shows you how to transmit and receive telex messages.

11.1 Manual Calling

The simplest way to communicate with a telex subscriber is Manual Calling. For the ARQ
mode, you may display beforehand the message to send, or type your message manually.
1. Press the function key [F3] to display the Operate menu.
2. Press the [9] key to choose Set Frequency.
3. Input Tx and Rx frequency pair.
4. Press the [Enter] key.
5. Press the function key [F3] again and then the [8] key to choose Manual Calling. The
following screen appears.
NOTICE
Before calling, watch the intended TX
frequency carefully to confirm that is
unoccupied.
Operate
1: Call Station
2: Macro Operation
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: Manual Calling
9: Set Frequency
Operate menu
Set Frequency
Tx Freq:
RX Freq:
Set frequency screen
0.00
0.00
11-1