Furuno FS-1570 Operator's Manual page 63

12. Rotate the [ENTER] knob to choose TELEPHONE and then push the [ENTER] knob.
(NBDP-FEC may also be used.) Push the [ENTER] knob to open the DSC FREQ
menu.
Compose message
**
CALL TYPE: RELAY ALL
DISTRE 123456789
4207.5
COAST ID:
6312.0
ID IN DIST:
12577.0
16804.5
DSC FREQ
GO TO EASY VIEW
GO TO ALL VIEW
13. Rotate the [ENTER] knob to choose appropriate DSC (NBDP) frequency and then
push the [ENTER] knob. The display now looks something like the one below in case
of radiotelephone.
Compose message
**
CALL TYPE : RELAY SEL
COAST ID :
001234567
ID IN DIST :
NATURE : SINKING
POS: 34 45N 135 22E AT 10:00
COM. TYPE
: TELEPHONE
DSC FREQ :
8414.5 KHZ
GO TO ALL VIEW
14. Press the [CALL] key, and the message "Category distress transmit sure?" appears.
Continue pressing the key until the display shows "Distress relay sel call in progress!"
to send the distress relay call.
Category distress
transmit sure?
TO COAST :
001234567
ID IN DIST : NO INFO
POS : 34 45N 135 22E AT 10:00
TELEPHONE
8291.0 KHZ
DSC FREQ :
8414.5 KHZ
KEEP PRESSED FOR
15. The equipment then waits for acknowledgement of the distress relay, displaying the
message shown below. If the distress relay is not acknowledged within five minutes,
the message "No response. Try relay again." appears. If this occurs, send the distress
relay again.
Wait for distress
relay acknowledge.
FROM COAST : 001234567
SHIP IN DIST: NO INFO
:
DSC FREQ 8414.5 KHZ
TIME TO GO : 4M59S
**
KHZ
**
NO INFO
[CALL] key
pressed 3
seconds
3S
4 DISTRESS OPERATIONS
Distress relay sel
call in progress!
TO COAST :
001234567
SHIP IN DIST : NO INFO
DSC FREQ :
8414.5 KHZ
TIME TO GO : 8S
4-15