Receiving An All Ships Call - Furuno FS-1570 Operator's Manual

Sending message by NBDP Terminal Unit
1. The message "STATION ENTRY COMPLETED FROM DSC. Press any key to escape."
appears on the NBDP's display. Press any key on the NBDP Terminal Unit to erase the
message.
2. Press the function key [F3] on the keyboard of the NBDP Terminal Unit to show the
Operate menu.
3. Choose "Call Station" and then press the [Enter] key.
4. "DSC" is selected; press the [Enter] key. "Connect" appears in reverse video.
5. Type and transmit your message.
6. When you have finished sending your message, press the [F10] key to disconnect the
line.

5.1.2 Receiving an all ships call

1. When an all ships call is received, the audio alarm sounds and the display looks
something like the one shown below.
All ships
call received.
FROM SHIP:
123456789
SAFETY
TELEPHONE
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display shows partial contents of the
all ships call as below.
Received message
*
MAR-23-2002-23:59
ALL SHIPS CALL
FROM SHIP:
SAFETY
TELEPHONE
GO TO ALL VIEW
3. Press the [CANCEL] key again to go to the radiotelephone screen. Watch for
communications about all ships call on the radiotelephone.
2182.0 KHZ
*
ECC: OK
123456789
2182.0 KHZ
To view detailed contents,
push the [ENTER] knob.
5 CALLING, RECEIVING
5-3