Product Description - Bosch AVENAR 4000 FAP-425-O User Manual

4 en | Product Description
1

Product Description

AVENAR detector 4000 combines standard detection procedures such as scattered light and
temperature measurement with gas measuring technology at the highest configuration level.
This method uses intelligent evaluation electronics (Intelligent Signal Processing - ISP) to
evaluate the signals from the smoke, thermal and gas sensor. Thus, immunity against false
alarms is increased significantly and detection time is reduced in comparison to the fire
detectors available on the market today.
Thanks to the combined information collected by the multi-sensor detectors, they can be used
in environments where simple smoke detectors cannot be employed.
AVENAR detector 4000 is suitable for surface and flush cable mounting and includes separate
mounting points for dropped ceiling and concealed sockets.
AVENAR detector 4000 is available in different versions of single-sensor and multi-sensor
detectors.
Identifier
FAP-425-O
FAP-425-O-R
FAP-425-OT
FAP-425-OT-R
FAP-425-DO-R
FAP-425-DOT-R
FAP-425-DOTC-R
FAH-425-T-R
2021-11 | 4 | F.01U.283.550
Description
Optical smoke detector, automatic
address setting only
Optical smoke detector, automatic and
manual address setting
Combined optical and thermal smoke
detector, automatic address setting only
Combined optical and thermal smoke
detector, automatic and manual address
setting
Dual-optical smoke detector, automatic
and manual address setting
Combined dual-optical and thermal
smoke detector, automatic and manual
address setting
Combined dual-optical, thermal and
chemical smoke detector, automatic and
manual address setting
Thermal detector, automatic and manual
address setting
User manual
AVENAR detector 4000
Category
Single sensor
Single sensor
Multi-sensor
Multi-sensor
Double sensor
Multi-sensor
Multi-sensor
Single sensor
Bosch Sicherheitssysteme GmbH