Safety Labels - Land Pride QH20 Series Operator's Manual

Important Safety Information

Safety Labels

Your Quick Hitch comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
QH15 & QH20
QH15 & QH20
4 QH15 Category l Hitch, & QH20 Category ll Hitch Quick Hitches 320-003M
Table of Contents
24876
37122
QH05
24876
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
818-590C
Danger: Crushing Hazard
818-866C
Caution: Pinch Point Hazard
12/04/15