Safety Labels - Land Pride ZT60 Operator's Manual

Important Safety Information

Safety Labels

Your mower comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
Seat platform and seat removed to show decal
®
4 ZT60 & ZT72 Accu-Z Zero Turn Mowers 357-103M
Table of Contents
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
838-303C
Danger: Battery
(In Engine Compartment Beneath The Seat Mount)
23986
838-829C
Caution: Do Not Power Wash
26700
9/03/10