Download Print this page
U-Line H-1440 Quick Start Manual

U-Line H-1440 Quick Start Manual

Hide thumbs Also See for H-1440:

Advertisement

Quick Links

π
H-1440
KIHLBERG PNEUMATIC
STAPLER
SAFETY WARNINGS
Read all warnings and instructions to prevent
injuries to yourself and to others.
1. Wear eye protection when using tool. Always use
other personal protection equipment as required,
such as ear protection, hard hats, etc.
2. Never use oxygen, combustible gases, CO
or high pressure gas tanks as power sources for the
PN-version of this tool; the tool may explode and
cause serious injury. Use only dry, clean, pressure
regulated compressed air to drive the tool.
3. Always check tool before every use.
4. Always disconnect the tool from the air supply and
empty the magazine when taking a break or ending
work, when servicing the tool, troubleshooting or
repairing. Never leave a loaded tool unattended.
PAGE 1 OF 3
1-800-295-5510
uline.com
5. Always assume that the tool is loaded. Respect the
tool as potentially dangerous. Never point the tool at
yourself or anyone else, whether it contains staples
or not. Always remove finger from trigger when not
driving staples.
6. Never hold your hand or another part of your body
, steam
2
under the tool.
7. Position yourself in a firmly balanced position when
using or handling the tool.
8. Do not modify the tool or set it up in a jig without
manufacturer's approval.
9. Use stapler with cardboard ONLY. No other use is
permitted without the approval of the manufacturer.
1113 IH-1440

Advertisement

loading
Need help?

Need help?

Do you have a question about the H-1440 and is the answer not in the manual?

Questions and answers

Summary of Contents for U-Line H-1440

  • Page 1 π H-1440 1-800-295-5510 uline.com KIHLBERG PNEUMATIC STAPLER SAFETY WARNINGS 5. Always assume that the tool is loaded. Respect the Read all warnings and instructions to prevent tool as potentially dangerous. Never point the tool at injuries to yourself and to others.
  • Page 2 OPERATION AttACh COmPREssED AiR the side guides in the magazine are adjustable. 'Outer' position denotes 18 mm, 'internal' denotes 15 mm. WARNING: Make sure the tool is not pointed at 3. tighten the locking screw. you or anyone else when connecting it to the compressed air line.
  • Page 3 SERvICING THE STAPLER mAiNtENANCE CLEARiNG JAms Before servicing, always disconnect the tool Generally you will not need to disassemble any parts to from the air supply, empty the magazine and clear jamming in the nozzle plate. read the section Safety warnings before starting 1.