Viessmann VITOGATE 200 Installation And Service Instructions Manual page 5

Preparing for installation
Product information
The Vitogate 200 type EIB gateway is
designed to hook up Vitotronic control
units with integral LON communication
module (accessory) to KNX/EIB sys-
tems.
Application
Communication is possible with the fol-
lowing Vitotronic control units:
Wall mounted gas boilers:
■ Vitotronic 100, type HC1
■ Vitotronic100, type HC2
■ Vitotronic 200, type HO1
■ Vitotronic 300-K, type MW2
Vitotronic 333, type MW2
Oil condensing boiler:
■ Vitotronic 200, type KW6
Medium and industrial/commercial boiler
systems:
■ Vitotronic 200-H, type HK1M
Vitotronic 050, type HK1M
■ Vitotronic 200-H, type HK1S, HK3S
Vitotronic 050, type HK1S, HK3S
Functions
The Vitogate 200, type EIB enables sys-
tem users to utilise the following func-
tions in conjunction with an EIB system:
■ Transfer of the operating states of the
heating system
■ Setting heating system parameters
Preparing for installation
The Vitogate 200, type EIB must be inte-
grated into the KNX/EIB system by an
authorised specialist.
■ Vitotronic 200-H, type HK1W, HK3W
Vitotronic 050, type HK1W, HK3W
■ Vitotronic 100, type GC1
■ Vitotronic 200, type GW1
■ Vitotronic 300, type GW2
■ Vitotronic 300-K, type MW1, MW1S
Vitotronic 333, type MW1, MW1S
■ Transfer of fault and error messages
■ Control of the flow temperature subject
to heat demand and in conjunction
with the Viessmann EIB module and
constant EIB control of individual room
temperature
5