Viessmann VITOGATE 200 Installation And Service Instructions Manual page 14
Communication for heating systems via knx/eib systems
Hide thumbs
Also See for VITOGATE 200:
Table of Contents
Advertisement
Commissioning
Vitotronic control unit LON integration
Communication with the appliances connected to the fault manager in a system is
tested by means of the subscriber check.
Preconditions:
■ The control unit must be programmed
as fault manager (code "79:1").
■ The LON subscriber number must be
programmed in all control units (see
page 12).
■ The fault manager LON subscriber list
must be up to date (see page 13).
Press the following keys:
1. L + d simultaneously for approx.
2 s.
The subscriber check has
been initiated.
User check
01
A Consecutive number
B Subscriber number
EIB product database
The EIB product database for the Vito-
gate 200, type EIB can be downloaded
from www.viessmann.de/vito-
gate-200-eib.
14
:
01
in the subscriber list
(cont.)
2. a/b
for the required subscriber.
3. d
Check is active.
"Check" flashes until its
completion. The display
and all backlit keys for the
selected subscriber flash
for approx. 60 s.
4. "Check OK" is displayed during com-
munication between both devices.
"Check not OK" is displayed if there
is no communication between both
devices. Check the LON connection
and encoding.
5. Repeat points 2 and 3 to check further
subscribers.
6. L + d simultaneously for approx.
1 s.
The subscriber check is
completed.
Download the EIB product database and
then import it into the EIB Tool software
(ETS). Only then can the parameters for
the communication objects be set for the
KNX/EIB system.
Advertisement
Table of Contents
