Commissioning
Parameters in ETS
Menu selection
5 s bis 120 min (5 s to
120 min)
nicht zyklisch senden
(do not transmit cycli-
cally)
Note
The shorter the cycle time, the higher the
BUS load (for example, see page 22).
Menu selection
nie senden (Never
transmit)
bei jeder Änderung sen-
den (transmit after every
change)
Error byte
Example with ETS3
24
(cont.)
Explanation
The fault message is transmitted cyclically to the EIB sys-
tem in accordance with the selected interval.
The fault message is either never transmitted to the EIB
system or only in the case of a change.
Max Abweichung (Max deviation)
Menu for the selection of the transmis-
sion interval subject to the setting of the
cycle time.
Explanation
The fault message is never transmitted to the EIB sys-
tem.
The fault message is transmitted to the EIB system follow-
ing every change from "0" to "1" or from "1" to "0" .
1: There is a fault
0: No fault