Management Operations; Transport And Checking On Receipt; Introduction; Weight Of The Circuit-Breakers With Packaging - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

Management operations

1 - Transport and checking on receipt

Introduction In view of their weight, Sace Emax 2/MS 1500 V DC series switch disconnectors require particular care during
Weight of the circuit-breakers
with packaging
Transport of the packaged
circuit-breaker
8 | © 2021 ABB | 1SDH002083A1002 - ECN000119014 - Rev. A
transport and handling.
They are distributed with following packages:
• one package for fixed circuit-breaker
• two packages for withdrawable circuit-breakers (one package for the fixed part and one for the mobile part).
WARNING! comply with the following instructions during each transport phase:
• The movable part of the circuit-breaker must be removed from the switchgear and/or
from the relative fixed part even if this latter is not installed in the switchgear.
• The circuit-breaker must be in the open position.
• The circuit-breaker must be protected and fastened in its original packing.
• The closing springs of the circuit-breaker must be completely discharged.
The following table specifies the weights of the circuit-breakers with packaging:
Standards Current
4000A
3200A
2500A
2000A
1600A
IEC 60947-3
4000A
3200A
2500A
2000A
1600A
UL 489B 3200A
2500A
2000A
1600A
UL 489B
UL 489F
2500A
2000A
1600A
(*)
Terminals supplied not assembled
NOTE:
• the indicated weights refer to fixed circuit-breakers with rear terminals without accessories.
• the weights of the fixed part refer to the version with vertical rear terminals and, if present, with
jumpers.
Consult the table "Weight of the circuit-breakers with packaging" before proceeding with the transport.
WARNING! Improper lifting can result in death, serious injury to persons and damage
to the equipment. Never lift a circuit-breaker and / or a fixed part above other people.
IMPORTANT: The trained personnel in charge of handling and lifting must use
appropriate safety equipment.
Fixed 4p
Configuration
Kg
120
120
4ps 105
105
105
114
114
2ps 104
104
104
4ps 132 (*)
2ps 140 (*)
132 (*)
4ps 119
119
140 (*)
2ps 115
115
Management operations | 1 - Transport and checking on receipt
Withdrawable
4p
Lbs Kg Lbs Kg
265 97
265 97
231 81
231 81
231 81
252 90
252 90
229 79
229 79
80 176
229 79
292 (*) 108 (*)
308 (*) 115 (*)
292 (*) 108 (*)
262 94
262 94
308 (*) 115 (*)
253 88
253 88
ABB | SACE Emax 2
Fixed part 4p
Lbs
214
214
179
179
179
198
198
174
174
174
238 (*)
254 (*)
238 (*)
207
207
254 (*)
194
194