New Holland CR6090 Tier 4a Service Manual page 76

16. From inside the grain tank, loosen the two front, en-
gine mounting bolts (1). Do not remove the mounting
bolts at this time.
17. From the platform side, loosen the two front, engine
mounting bolts (1). Do not remove the mounting bolts
at this time.
18. Loosen and remove all the cap screws (1) that couple
the engine to the gearbox, if you have not done so
already. There are twelve cap screws in total.
19. For safety reasons to the radiator, place a sheet of ply-
wood, cut to size, in front of the radiator for protection.
20. With the engine securely supported by the lifting de-
vice, remove all of the engine mounting bolts loosened
in the previous steps.
21. Slide the engine towards the radiator to disengage the
flex plate from the gearbox input shaft.
22. Carefully lift the engine from the frame and remove
from the combine.
Next operation:
Engine - Install (10.001).
Engine - Engine and crankcase
47667943 24/04/2014
10.1 [10.001] / 8
13
86070234
14
86070235
15
86070283