Advertisement
Engine - Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust treatment
12. Using a belt, sling the muffler, at two points at least,
take up the slack with a hoist. Remove the bolts (2)
that secure the exhaust pipe (1) to the support (3).
Then extract all of the pipe from the right-hand side of
the tractor and put it down on a pallet on the ground.
13. Put two eyebolts (1) on the screws retaining the upper
heat shield of the filter. Using a chain, hook on the filter
(2) and tension the chains.
14. On the left-hand side, under the filter remove the two
screws (1) on the adjustment bushings (3) of the filter
left support (2).
NOTE: After taking out the screws, unscrew the bushings
so as to create a gap between the filter assembly and the
left support.
15. On the right-hand side, loosen the clamp (1) that
secures the filter decoupler to the turbine.
the clamp toward the front. Take out the three hex
socket screws (2) fastening the right support (3) to
the transversal one.
NOTE: These screws have been fitted by the supplier and
a few drops of Loctite have been used to prevent them,
over time, from coming loose.
Move
47840679 10/03/2015
10.3 [10.501] / 19
9
MOIL12APL100
10
MOIL12APL101
11
MOIL12APL102
12
MOIL12APL103
Hide quick links:
Advertisement
