New Holland T4.85 Service Manual page 26

Engine - Remove
1. Remove the engine hood (1), as indicated in Hood -
Remove (90.100) .
2. Remove the battery, as described in Battery - Remove
(55.302).
3. Remove the tank, as described in Fuel tank - Remove
(10.216).
4. Loosen the retaining bolts (1). Remove the front wheel
fenders (2) (if any). Do this on both sides.
5. Recover the refrigerant from the system via the fittings
(1) and (2) using the specific tool 380000315. Detach
the two lines by disconnecting any support straps.
6. Then detach the lower pipe (3) on the condenser (1).
Free the pipe from any straps or clamps. Disconnect
the sensor (2). Place the pipe on the cab.
Engine - Engine and crankcase
47840679 10/03/2015
10.1 [10.001] / 3
1
WLAPL4S10C104A
2
WLAPL4S10C106AA
3
WLAPL4S10C107A