New Holland T4.85 Service Manual page 73

Engine - Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust treatment
Diesel Particulate Filters (DPF) - Install for periodic replacement
NOTE: For the torque settings please refer to , Diesel Particulate Filters (DPF) - Torque (10.501) .
1. Re-assemble the central part of the DPF filter (2) with
the relevant clamp. Tighten the clamp (1), paying at-
tention to the orientation of the parts.
2. Re-assemble the left-hand part of the DPF filter (1) with
the relevant clamp (2). Tighten the clamp, paying atten-
tion to the orientation of the parts.
NOTE: If the clamp and the seal are rusty or in a poor
condition, change the clamp and the seal.
3. Reassemble the left-hand clamp (1) fastening the filter
on the cradle.
4. Position the collar (1) fastening the filter pipe to the
muffler. Tighten it. Also tighten the top of the collar
(2) that fixes the pipe to the cradle.
47840679 10/03/2015
10.3 [10.501] / 14
1
MOIL12APL108
2
MOIL12APL110
3
MOIL12APL109
4
MOIL12APL107