Advertisement
Engine - Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust treatment
Diesel Particulate Filters (DPF) - Remove for periodic replacement
1. Raise the bonnet, disconnect the headlights connector
from the engine cable. Remove the hood. See Hood -
Remove (90.100).
NOTE: Remove the hinge from the support leaving this
under the bonnet.
2. Remove the side panels on both sides.
3. Loosen the clamp of the connection pipe (1) between
the air cleaner (3) and turbine, unscrew the retaining
screws of the air intake pipe (2) then slide it towards
the front so that it comes out of the filter inlet. Then, af-
ter disconnecting the clogged filter sensor connection,
remove the filter from the bonnet support.
4. Disconnect the connectors on the pressure differential
sensor (1), on the two temperature sensors, and on
the lambda sensor. Loosen the system heat shield (2).
Position everything on the left-hand side of the engine.
5. Remove the bonnet support (1).
47840679 10/03/2015
10.3 [10.501] / 11
1
MOLI12U0166AA
2
MOIL12APL111
3
MOIL12APL113
4
MOIL12APL115
Hide quick links:
Advertisement
