New Holland FR480 Forage Cruiser Service Manual page 76

Cooling fan
56. On the fan support, remove the hardware (54) of the
oil filter (53). Lay the oil filter (53) down without re-
moving the hoses.
57. Remove the hardware (56) of the support (57).
58. Remove the clamp hardware (55).
59. On the left-hand side of the machine, under the main
gearbox clutch shaft, remove the hardware (56) and
the support (57).
60. Release the tension of the fan drive belt tensioner
(62). Remove the fan drive belt (63).
61. Disconnect the hose (60) and the hose (61).
62. Remove the clamps (55).
63. Remove the tube (58) and the tube (59). See also the
arrows in Figure 41.
Engine - Engine and crankcase
48142788 28/04/2017
10.1 [10.001] / 13
37
ZEIL15FR00126AA
38
ZEIL15FR00127AA
39
ZEIL15FR00128AA
40
ZEIL15FR00125AA