Advertisement
Central heating
Central heating settings
If you require central heating, check the following
points:
Have you selected the heating circuit?
■
For settings see chapter "Selecting the heating cir-
cuit".
■
Have you set the required room temperature?
Selecting the heating circuit
Heating can, if necessary, be split over several heating
circuits.
■
In the case of heating systems with several heating
circuits, for all central heating settings, first select the
heating circuit where you want to make a change.
This selection is not possible in heating systems with
■
only one heating circuit.
Setting central heating temperatures
Setting the room temperature for standard heating mode
Default display
1. "Menu"
2. "Heating"
3. Select the required heating circuit.
Heating zone regulated circuit 1
Reduced
Op mode
room temperature
Set temperature
Holiday program
day
Fig.6
Setting the room temperature for reduced heating mode (night setback)
Default display
1. "Menu"
2. "Heating"
3. Select the required heating circuit.
12
■
■
If you or your heating contractor have renamed the
heating circuits (to "Flat" for example), that name will
be shown in place of "Heating circuit 1".
4. "Set temperature, day"
Time program
Heating
Temperature level
Diagram
5. +/- for the required temperature
6. Press "OK" to confirm
4. "Reduced room temperature"
Have you selected the correct operating program?
Have you selected the required time program?
Set temperature, day
21.0°
Fig.7
Reduced room temperature
19.0°
Fig.8
OK
OK
Advertisement
