B1830, B2230, B2530, B3030, WSM
Adjusting Clutch Pedal Free Travel
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free travel at the
top of pedal stroke.
3. If adjustment is needed, loosen the lock nut (2) and turn the
clutch rod (1) to adjust the rod length within acceptable limits.
4. Retighten the lock nut (2).
5. After adjusting, release the clutch pedal and check the clearance
(B). If adjustment is needed, adjust the clearance B with the bolt
(3).
NOTE
• After adjustment, sure the stopper bolt with the lock nut (3).
Clutch pedal free travel
Factory spec.
(A)
(1) Clutch Pedal Rod
(2) Lock Nut
(3) Bolt
G-16
G GENERAL
20 to 30 mm
0.79 to 1.18 in.
(A) Clutch pedal free travel
(B) Clearance (About 8.5 mm, 0.34 in.)
W10317160
KiSC issued 03, 2007 A