Advertisement
The accessories,
contained in a pouch, are as follows:
darning foot and plate
bobbins (plus one already placed in the rotary hook)
assortment of needles
cleaning brush
oiler
small screwdriver
1 2 1 1 1 1
plus:
a soft cover, and
for the Elna Elnita-zz (zig zag)
and the Elna Elnita-sp (special)
1 embroidery and buttonhole foot
1 buttonhole knife
Before starting
1 Sewing foot, already in place on the machine.
2 Raise the thread guide, which is used to wind
the bobbin, and to thread the upper thread (see the
following page).
If you should have to change the needle
3 Hold the needle, with its flat against the index
finger (3 a) and push it as far as it will go into the
needle clamp (3 b). Tighten the screw firmly
(no need for a screwdriver). Use needles of the
system 130/705 H (style 15 x 1).
4 If you are using your Elna Elnita for the first time,
or have not sewn on it for a while, place a drop
of oil in each of the two points marked in red
on the rotary hook, as illustrated.
-elnita
For all models
Advertisement
