Advertisement
1. INFORMATION
2. Before you start service
• Read all instructions and safety instructions in this
manual and on your machine safety decals.
• Clean the work area and machine.
• Park the machine on a stable and level ground, and
set the parking brake.
• Lower the implement to the ground.
• Stop the engine, then remove the key.
• Disconnect the battery negative cable.
• Hang a "DO NOT OPERATE" tag in the operator
station.
3. Start safely
• Do not do the procedures below when you start the
engine.
1. Short across starter terminals.
2. Bypass the safety start switch.
• Do not alter or remove any part of machine safety
system.
• Before you start the engine, make sure that all shift
levers are in neutral positions or in disengaged
positions.
• Do not start the engine when you stay on the
ground. Start the engine only from operator's seat.
1-2
4. Operate safely
• Do not use the machine after you consume alcohol
or medication or when you are tired.
• Put on applicable clothing and safety equipment.
• Use applicable tools only. Do not use alternative
tools or parts.
• When 2 or more persons do servicing, make sure
that you do it safely.
• Do not touch the hot parts or parts that turn when
the engine operates.
• Do not remove the radiator cap when the engine
operates, or immediately after it stops. If not, hot
water can spout out from the radiator. Only remove
the radiator cap when it is at a sufficiently low
temperature to touch with bare hands. Slowly
BX23S, LA340, BT603, RCK54D, RCK60D, RCK54, RCK60B
SAFETY FIRST
2. Before you start service
KiSC issued 03, 2017 A
Advertisement
