New Holland MZ19H Repair Manual page 7

LUBRICATION FITTINGS
Front Castor Pivots........................................
Front Castor Wheels......................................
Lift Assembly .................................................
Deck Idler Pivot .............................................
Transaxle Idler Pivot......................................
Control Linkage Pivot ....................................
DIMENSIONS
Wheel Base ...................................................
Width .............................................................
Overall Width .................................................
Overall Length ...............................................
Overall Height................................................
Track Width ...................................................
Deck Width ....................................................
WEIGHT
Net Weight
DECK
DECK BELT COVERS
DEFLECTOR
ANTI-SCALP ROLLERS
DECK OFFSET
SECTION 1 - GENERAL INFORMATION
2 Fittings
2 Fittings
3 Fittings
1 Fitting
1 Fitting
2 Fittings
52.1 in. (132.3 cm) center of castor to center of drive tires
47.6 in. (120.9 cm) outside rear tires
65 in. (165.1 cm) with deck deflector down
58 in. (147.3 cm) Gate width with deck deflector up.
77.5 in. (196.9 cm)
41 in. (104.1 cm)
37.5 in. (95.3 cm) center to center of rear tires
30.4 in. (77.2 cm) center to center of castor tires
65 in. (165.1 cm) w/deflector down
680 lbs. (309 kg) (estimated)
Right side discharge. 52 in. (132 cm) cut, three blade
mid-mounted rotary. Drawn 12 gauge steel deck with
welded mounting brackets and gauge wheel brackets.
Frame supported.
Removable 16 gauge formed sheet metal, fastened to
deck with thread forming screws. Access holes in top for
greasing spindles.
12 gauge formed, held down by torsion springs at pivot
bracket.
One front mounted
None. Deck centerline on machine centerline.
1-5
Find manuals at https://best-manuals.com
MZ19H