Safety Information - Weller WE 1 Translation Of The Original Instructions

Read these instructions and the safety
guidelines carefully before starting up the unit
and starting work.
life and limb.
Keep these instructions in a place that is accessible to all
users. Please adhere to the operating instructions of the
connected devices.

Safety information

For safety reasons, children and youths under the age
of 16, as well as persons who are not familiar with these
operating instructions, may not use the device. Children
shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorised
persons. Never allow other persons to touch the soldering
tool or cable.
WARNING Electrical shock
Connecting the control unit incorrectly poses a risk of
injury due to electric shock and can damage the device.
•
before putting the control unit into operation and observe
•
If the device is faulty, active electrical conductors may
be bare or the PE conductor may not be functional.
•
specialist.
•
organisation.
Protect yourself against electric shocks. The handles on
soldering tools with an antistatic design are conductive.
Avoid touching earthed objects such as pipes, heaters,
•
cookers and refrigerators.
Do not use the soldering tool in a damp or wet environ-
•
ment.
•
Caution! To provide continued protection against risk of
•
1.800.561.8187
Risk of burns from the soldering tool while the control
unit is operating. Tools may still be hot long after they
have been switched off.
The soldering tip becomes very hot during soldering
work. There is a risk of burns from touching the tips.
After the soldering process, the soldering tool and the
workpiece holder are still hot.
•
•
•
Risk of burning through liquid solder. Protect yourself
against solder splashes.
•
protection.
When working with adhesives, special attention must be
•
manufacturer.
Covering the soldering iron or the safety holder poses
soldering iron and safety holder.
•
•
from the hot soldering tool.
Store your soldering tool in a safe place. When not in
area out of the reach of children. Make sure that unused
soldering tools are free of voltage and de-pressurised.
The power cable must only be plugged into the power
socket or adapter approved for this purpose. Check to
see if the mains voltage matches the ratings on the
nameplate. Make sure the machine is switched off before
plugging in.
Do not use the cable for purposes other than those for
which it is intended.
not use the cable to pull the plug out of the socket. Protect
the cable against heat, oil and sharp edges..
Be alert.
Avoid abnormal posture.
unit, as this can lead to postural problems.
www. .com
WARNING Risk of burns
WARNING Fire hazard
information@itm.com
EN
ENGLISH
13