Safety Information - Weller WLIR30 Translation Of The Original Instructions

Read these instructions and the safety
guidelines carefully before starting up the
unit and starting work.
Failure to observe the safety regulations results in a
risk to life and limb.
Keep these instructions in a place that is accessible
to all users.Please adhere to the operating instruc-
tions of the connected devices.

Safety information

This appliance can be used by child-
ren aged from 8 years and above and
persons with reduced physical, senso-
ry or mental capabilities or lack of ex-
perience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance.
Cleaning and user maintenance shall
not be made by children without su-
pervision.
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorised
persons. Never allow other persons to touch the soldering
tool or cable.
WARNING Electrical shock
Do not use the soldering tool in a damp or wet environment.
•
Never work on voltage-carrying parts.
•
WARNING Fire hazard
Covering the soldering iron or the safety holder poses
a fire hazard. Always keep objects well away from the
soldering iron and safety holder.
Always keep objects well away from the soldering iron and
•
safety holder.
Keep all combustible objects, liquids or gases well away
•
from the hot soldering tool.
Do not place or leave the hot soldering tip on the
•
worktop or on plastic surfaces.
Avoid unintentional operation.
•
Disconnect the soldering tool from the power supply
•
while not in use.
Keep explosive and flammable objects well away from
•
the device.
WARNING Risk of burns
The soldering tip becomes very hot during soldering
work. There is a risk of burns from touching the tips.
After the soldering process, the soldering tool and the
workpiece holder are still hot.
Always place the soldering tool in the safety rest while not
•
in use. Make sure the safety holder is stable.
Do not touch the hot soldering tips and keep them away
•
from inflammable objects.
Only replace solder tips when cold
•
Risk of burning through liquid solder. Protect yourself
against solder splashes.
Wear appropriate protective clothing to protect yourself
•
against burns. Protect your eyes by wearing eye
protection.
When working with adhesives, special attention must be
•
paid to the warning information provided by the adhesive
manufacturer.
Store your soldering tool in a safe place..When not in use,
units and tools should be stored in a dry, high or locked area
out of the reach of children. Make sure that unused soldering
tools are free of voltage and de-pressurised.
Always place the soldering tool in the safety rest while
not in use. Prevent the soldering tip from becoming seized.
A thin graphite layer applied to the thin end of the soldering
tip, plus frequent withdrawal of the soldering tip, prevents
unpleasant seizure. During soldering breaks, always ensure
that the soldering tip is well tin-coated.
Always use the correct soldering tin. For normal electrical
connections, use a solder with as low an acid content as
possible together with a mild fluxing agent.
Soldering tip range: Please visit www.apex-tools.eu. www.
apex-tools.eu.
Do not use the cable for purposes other than those for
which it is intended. Never carry the unit by the cable. Do
not use the cable to pull the plug out of the socket. Protect
the cable against heat, oil and sharp edges.
Be alert. Pay attention to what you are doing. Be smart when
using the unit. Do not use the soldering tool if you are having
difficulty concentrating.
Avoid abnormal posture. Arrange your work station in an
ergonomically correct way. Avoid bad posture when using the
unit, as this can lead to postural problems.
The soldering tool must be operated only in perfect
technical working order. Safety devices must not be
deactivated.
Faults and defects must be repaired immediately. Before
using the unit / tool, safety devices must be carefully checked
to make sure that they are functioning properly and in the
manner intended. Check that moving parts are functioning
properly and are not sticking, and whether parts are dama-
ged. All parts must be correctly fitted and must satisfy all the
ENGLISH
EN
7