Dismantling The Tool When No Longer Used; Disposal Of Exhaust Materials; Indications For Special Waste - CAMPAGNOLA HERCULES Use And Maintenance Manual

Electric pruning shear
Hide thumbs Also See for HERCULES:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14

7 DISMANTLING THE TOOL WHEN NO LONGER USED

Disposal of exhaust materials

After having been installed and during use, the machine does not cause any environmental pollution. However,
throughout its working life, some types of residual waste or exhaust materials, such as the lubricants for the
mechanical components, are being produced in certain maintenance situations.
There are specific regulations in every Country as for the disposal of these materials and the environment
protection. The Customer is required to be knowledgeable in the Laws in force in his own Country and to oper-
ate only while complying with these regulations, according to the indications in the product technical charts,
which may be obtained from the Manufacturer.
WARNING!
The Laws in force about the disposal of mineral oils or greases used for the lubrication / maintenance opera-
tions must be followed.
WARNING!
More information about the disposal of oils and other substances can be found in the safety chart of the sub-
stances.
The steps employed in the disposal of toxic waste including the collecting, transporting, processing (transfor-
mation for recycling), as well as the deposit and the dumping onto the ground are all usual activities of common
interest and are subject to the following general principles:
a)
Any risks of injuries or dangers for the health and safety of any individual and of the community
have to be avoided.
b)
Compliance with any and all hygienic-sanitary requirement and avoidance of any air, water,
ground and underground pollution have to be guaranteed.
Compliance with efficient and economical principles in order to save and recycle energy and materials shall be
promoted.

Indications for special waste

Special waste is that deriving from industrial processes as well as from materials of dismantled equipment and
deteriorated and obsolete machineries.
The special (also toxic and harmful) waste producers shall provide for its disposal directly or through qualified,
authorised companies or bodies, or shall deliver them to public service after having made an agreement.
When disposing of special waste, check with the relevant local government authority for any available infor-
mation regarding such waste disposal in your region.
WARNING!
Any unauthorised disposal by the owner of a product is followed by the application of the sanctions due to the
regulations in force.
WARNING!
In compliance with the Directive 2012/19/EU on RAEE any bought element/equipment marked with the symbol
of the crossed dustbin means that it has to be collected, at the end of its working life, separately from other
waste:
The separate collection of the element/equipment, at the end of its working life, shall be managed by
the Manufacturer. The user shall, therefore, contact the Manufacturer and follow the procedures estab-
lished by the Manufacturer himself for the separate collection of an end-of-life equipment. The adequate
separate collection and the following processing and eco-friendly disposal avoid negative effects on the
health and the environment and allow the recycling of the materials the products are made of. Any
unauthorised disposal, personally carried out by the end-user, would cause the application of sanctions,
according to the local Laws.
Pag. 22
Use and maintenance manual – Translation of
original Instruction Ver.1.0 - Rev.: 02, Date : 25/01/2022

Advertisement

Table of Contents
loading

Table of Contents