Table of Contents
Advertisement
Malfunction
E:90-01 lights up alternately. Mains voltage is too low.
Another one appears
error code in the indicator - present.
star.
E:01-00 to E:90-10
Washing result
Malfunction
Crockery is not dry.
Cause
There is a technical malfunction
Cause
No rinse aid has been
used or the dosage is
set too low.
The program or program
option has no drying phase or a
drying phase that is too short.
Troubleshooting NL
Troubleshooting
There is no error in the device.
Contact an electrician.
1.
Have the mains voltage and
2.
electrical installation checked by
the electrician.
Press .
1.
Disconnect the appliance from
2.
the mains or switch off the
fuse.
Wait at least 2 minutes.
3.
Plug the appliance into a
4.
mains socket or switch on
the fuse.
Switch on the device.
5.
If the problem occurs
6.
again:
Press .
s
s
Close the tap.
s
Remove the plug from the
socket.
Contact the "service
s
department"
→
Page 56 and mention the
error code.
Troubleshooting
Fill the "rinse agent"
1.
→
Page 26 Bee.
Set the amount of rinse aid.
2.
→ "Amount of rinse aid
set", page 26
Select a program with drying,
"
e.g. Intensive, Strong or ECO
program." → Page 17
The drying result is reduced with
some option buttons, eg
Variospeed.
43
Advertisement
Table of Contents
