Table of Contents
Advertisement
Malfunction
Insides of the appliance
are wet after the wash
cycle.
Food remains on the
crockery.
Cause
No malfunction. For
condensation drying, water
drops in the rinse aid
container are necessary and
desirable. The moisture in
the air condenses on the
inner walls of the appliance,
flows downwards and is
pumped out.
Crockery is placed too
close together or the
basket is too full.
Spray arms cannot
rotate freely.
Spray arm nozzles are
clogged.
The seven are polluted.
The strainers are incorrectly
fitted and/or not secured.
Washing program too weak
chosen.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
High, narrow items of
crockery are insufficiently
spread out in the corners.
flushed.
The upper basket is not
set to the same height
on the right and left.
Troubleshooting NL
Troubleshooting
No action required. No action
required.
Arrange the crockery with sufficient
1.
space between them.
The spray jets must be able to
reach the surface of the
dishes.
Avoid touch points.
2.
Arrange the crockery in such a way that it
▶
dishes do not interfere with the
rotation of the spray arm.
Clean the "spray arms"
▶
→
Page 39.
Clean the sieves.
▶
→
"Cleaning Sieves", Page 38
Apply the sieves properly.
1.
→
"Sieve System", Page 38
Secure the seven.
2.
Select a more powerful rinse program
▶
mom.
→ "Programs", Page 17
Only remove coarse food residues
▶
and do not pre-rinse the dishes.
Ample high, narrow pieces of crockery
▶
well not too oblique and not in the
corners.
Upper basket left and
▶
right to the same height.
→
"Top crockery basket",
Page 19
45
Advertisement
Table of Contents
