Siemens SL63HX60AE User Manual page 48

NL Troubleshooting
Malfunction
There are colored (blue,
yellow, brown), difficult
or non-removable
deposits in the interior of
the appliance or on
stainless steel dishes.
There are colored (yellow,
orange, brown) deposits
that are easy to remove
in the interior of the
appliance (especially on
the bottom).
Plastic parts inside
the appliance are
discolored.
Plastic parts are
discolored.
There are removable
smudges on glasses,
glassware with a metallic
appearance and cutlery.
48
Cause
Layering occurs due to the
components of vegetables
(cabbage, celery,
potatoes, noodles, ...) or
tap water (manganese).
Metal components
cause filming on silver
or aluminum crockery.
Layers are formed by
components of food
residues and tap water
(lime), 'soapy'.
Plastic parts in the
interior may discolour
during the life of the
dishwasher.
Washing temperature is too low.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
The amount of rinse
aid is set too high.
Troubleshooting
Clean the device.
▶
You can remove the deposits with a
"mechanical cleaning" → Page 36 or
remove a machine cleaner. The
deposit can not always be
completely removed, but it is not
harmful to health.
Clean the device.
▶
You can remove the deposits with a
"mechanical cleaning" → Page 36 or
remove a machine cleaner. The
deposit can not always be
completely removed, but it is not
harmful to health.
Check the water softening
1.
setting.
Top up with softening salt.
2.
→
"Filling softening salt",
Page 24
If you use combination
3.
detergents (tabs), activate the
water softening.
Follow the directions for the
detergents.
→ "Notes on detergents
share", Page 29
Discoloration may occur,
▶
but they do not adversely affect
the operation of the appliance.
Select a program with a high
▶
re wash temperature.
→ "Programs", Page 17
Only remove coarse food residues
▶
and do not pre-rinse the dishes.
Set the rinse system to
▶
a lower position.