Jimmy H8 Instruction Manual page 29

3.Rotate HEPA holder to lift HEPA from
v a c u u m c l e a n e r. C y c l o n e c a n a l s o
be removed from vacuum cleaner for
cleaning in the same way.(Fig 16)
4. Rotate HEPA holder to take off HEPA
for cleaning.HEPA needs completely dry
before reuse.
5.After clean and dry the HEPA (Replace
HEPA if necessary).
Clean brushroll
Move the brushroll release button along
the arrow direction to remove side cover.
(Fig 17)
Remove one end of the brushroll and take
it out from nozzle for cleaning.(Fig 18)
After cleaning or replacing brushroll,
assemble it back in opposite sequence of
disassembly.
Clean floorhead air path
1. Push the two buttons to remove floorhead air path cover.(Fig 19).
2. Hold floorhead air path with finger and pull it out to clean.
3. After cleaning, assemble in opposite sequence of disassembly.
When the vacuum is long idled, need to remove the battery. Press the battery release button,
remove the battery pack in the arrow direction and place the battery in a plastic bag, then store
it in a cool and dry place, do not put in direct sunlight or humid environment. (Fig 20).
28
18
19
20