Steinbach 8500 User Manual page 40

Active display elements in heating operating mode:
G
26
24
17
- The Heating indicator
- The Temperature 2 display
- The Timer display
22
hours, if the timer is activated (see the "Operation" section).
- The Temperature 1 display
- The SET/TEMP indicator
Active display elements in cooling operating mode:
H
19
26
24
17
- The Cooling indicator
- The Temperature 2 display
- The Timer display
22
hours, if the timer is activated (see the "Operation" section).
- The Temperature 1 display
- The SET/TEMP indicator
Saving energy
To reduce energy consumption and related costs, you can take the following measures:
• If you do not use the pool for a few days (e.g., on weekends), keep the current water
temperature approximately at the desired water temperature. The heat pump needs
time to heat up the pool water. If there is a large temperature difference between the
40
20
21
22
is lit.
20
shows the current water temperature.
21
shows the time remaining for the automatic activation of the standby mode in
shows the set water temperature.
24
is lit.
26
21
22
is lit.
19
shows the set water temperature.
21
shows the time remaining for the automatic activation of the standby mode in
shows the current water temperature.
24
is lit.
26