Download Print this page

Function Programming - Fortin E400 Quick Installation Manual

Advertisement

Available languages

Available languages

FUNCTION PROGRAMMING

1
2
STEP
STEP
Disarm alarm,
Press and hold
disable valet.
the valet switch
Turn the Igni-
until the Parking
tion ON.
lights turn ON,
the horn/siren
will chirp.
MASTER RESET OF ALL PROGRAMMED FUNCTIONS AND REMOTES
1
STEP
Disarm
alarm,
disable valet.
Turn the Igni-
tion ON.
FUNCTION
MODE 1
FUNCTION
1
Program Driver 1
ADD REMOTE
Programmable
Output
2
2nd Ignition
(+) Ign/Acc/Start/
Park-Light
Increase
3
Tachless sensivity
crank time
Remote car starter
Gas: 15 minutes
4
runtime
Diesel: 30 minutes
5
6
Lock/Unlock control
Ignition Lock/Unlock
7
control
8
Unlock Pulse Time
Single 0.25 sec
Active or Passive
Press LOCK to activate
9
Alarm & Starter Kill
the Alarm and starter-
10
Starter Kill Output
Starter-kill &anti-grind
1st LOCK/UNLOCK
silent - 2nd LOCK/
Sound confi rmation
11
UNLOCK sound
& LED antenne
---------------------------
Antenna LED active.
Horn/Siren
12
Horn(-) only.
confi rmation
13
Confi rmation Pulse
Alarm ON/Off
Alarm OFF
14
Starter ON/Off
Remote-starter ON
3
STEP
STEP
Press and release the
Press and
valet switch X times for the
release the
desired function. The Park-
brake-pedal
ing lights will flash and the
horn/siren will chirp each
time to confirm.
2
STEP
STEP
Press and hold the
valet switch until the
Parking lights turn
ON, the horn/siren
will chirp.
MODE 2
DEFAULT
Program Driver 2
2nd Accessory
Gas: 7 minutes
Diesel: 14 minutes
Unlock before remote-
No
start & Lock after
remote-start.
Lock after foot-brake
No
& unlock after key is
turned off.
Double 0.25 sec
Passive (Lock disabled)
Active
Arm alarm activate
starter-kill 30(MODE
4), 60(MODE5), or
kill.
120(MODE6) sec. after
the door is closed.
Anti-grind only
LOCK/UNLOCK
sound always.
Siren(+) only
Long
Short
Alarm ON
Remote-starter ON
4
MODE 1 -
MODE 2 -
X1
MODE 3 -
MODE 4 -
MODE 5 -
MODE 6 -
Press the BUTTON on a programmed remote to select the mode (X).
The Parking lights will flash 1-6 times to confirm.
once.
Return to step 3 to programmed the next option
3
4
STEP
Press and
Press and
X1
release
release
the valet
the brake-
23
switch
pedal once.
times.
MODE 3
Multivehicle program
2nd Starter
(By default)
Gas: 3 minutes
Diesel: 6 minutes
Lock after remote-start.
Unlock after key is turned
off.
Single 4.0 sec
Passive (Lock enabled)
Arm alarm, activate
starter-kill and lock
doors 30(MODE
4), 60(MODE5), or
120(MODE6) sec. after
the door is closed.
Relay normally open
Antenna LED disabled.
Siren(+) & Horn(-)
Alarm ON
Remote-starter OFF
5
STEP
LOCK
UNLOCK
TRUNK
START
LOCK
+
UNLOCK
TRUNK
+
START
5
STEP
Press and hold
the valet switch
for 5 seconds. The
Parking lights will
flash to confirm.
MODE 4
MODE 5
Pink Ignition
Pink
Orange 2nd Ignition
Orange Accessory
White Starter
White
Yellow 2nd Starter
Yellow
Brown Park-Light (+)
Brown
Aux. 1
Unlock and relock after
Relock 10 sec.after
shut-down.
shut-down.
Doorlock Output at
Ignition only.
Single 2.5 sec
Single 1.5 sec
Passive arm
Passive arm
30 seconds (by default
60 seconds. (if MODE
if MODE 2 ot 3 is
2 ot 3 is activated.
activated.
Antenna LED disabled
Confi rmation sound at
with ignition.
LOCK only
During alarm siren(+)
will pulse and horn(-) is
constant.
6
STEP
Turn the Igni-
tion OFF to exit
programming.
The Parking
lights will flash
4 times.
6
STEP
Turn the Ignition OFF
to exit programming.
The Parking lights will
flash 4 times.
MODE 6
+
+
Ignition
Pink
Ignition
Orange Accessory
2nd Ignition
White
Starter
Starter
Yellow
2nd Starter
2nd
Brown
2nd Ignition
Accessory
Park-Light
Park-Light (-)
Aux. 1
(-)
Decrease
crank time
Disarm before shut
down.
Single 0.75 sec
Passive arm 120
seconds. (if MODE 2
ot 3 is activated.
Panic mode disabled

Advertisement

loading