Function Programming - Fortin EVO-ONE FTX75 Quick Installation Manual

All-in-one data interface remote starter / alarm
Hide thumbs Also See for EVO-ONE FTX75:
Table of Contents

Advertisement

Available languages

Available languages

FUNCTION PROGRAMMING

1
2
STEP
STEP
Disarm alarm,
Press and hold
disable valet.
the valet-switch
Turn the Igni-
until the LED
tion on.
fl ashes, then
release.
FUNCTION
FUNCTION
1
White (+)Ignition2
Programmable
Output
Orange (+)Accessory
2
(+) Ign/Acc/Start
Pink (+)Ignition
(FUNCTION 31
MODE 4)
Yellow (+)Start
Increase
3
Tachless sensivity
crank time
Remote car starter
Gas: 15 minutes
4
runtime
Diesel: 30 minutes
5
Add Remote
Door Lock before
6
and after remote-
start
7
Safety Locks
Unlock Pulse
8
Single 0.25 sec
Time
Active or Passive
Press LOCK to
9
Alarm & Starter
activate the Alarm and
Kill
10
1st LOCK/UNLOCK
2nd LOCK/UNLOCK
11
Confi rmation
---------------------------
Antenna LED active.
Sound
12
Confi rmation
Confi rmation
13
Pulse
Alarm disabled
Alarm & Starter
14
Remote-starter
Options
Smart Door lock
15
relocking and
alarm rearming
3 hours at -5
16
Cold Start Timer
17
18
Diesel Mode
3
STEP
Press and release the valet-switch
1-38 times for the desired chan-
nel. The park-lights will fl ash and
the horn/siren will chirp once to
confi rm.
MODE 1
MODE 2
White (+)Accessory2
Orange (+)Accessory
Pink (+)Ignition
Yellow (+)Start
Gas: 7 minutes
Diesel: 14 minutes
Add Remote
Unlock before remote-
No
start & Lock after
remote-start.
Lock after foot-brake &
No
unlock after key is
turned off.
Double 0.25 sec
Passive (Lock disabled)
Active
Arm alarm activate
starter-kill 30(MODE
4), 60(MODE5), or
starter-kill.
120(MODE6) sec. after
the door is closed.
silent
LOCK/UNLOCK
sound
sound always.
Horn only.
No sound.
Long
Short
Alarm &
Remote-starter enabled.
enabled.
(Unlock signal)
Automatically LOCK and
Disable
rearm alarm if door(s)
are not opened after 30
seconds.
c/
1.5 hours at -5
o
Runtime
Runtime
Enable (20 seconds)
Delay between Ignition
Disable
power up and Starter
(crank).
4
STEP
X1
Press and
Press the BUTTON on a programmed remote to select the
release the
brake-pedal
once.
The park-lights will fl ash 1-6 times to confi rm.
Return to step 3 to programmed the next option
MODE 3
White (+)Start2
Orange (+)Accessory
Pink (+)Ignition
Yellow (+)Start
(By default)
Gas: 3 minutes
Diesel: 6 minutes
Lock after remote-
start.
Unlock after key is
turned off.
Single 4.0 sec
Passive (Lock
enabled)
Arm alarm, activate
starter-kill and lock
doors 30(MODE
4), 60(MODE5), or
120(MODE6) sec. after
the door is closed.
Antenna LED disabled.
Alarm enabled
Remote-starter
disabled.
Lock when starter kill
arms.
c/
3 hours at -5
o
minutes
Enable (10 seconds)
Delay between Ignition
power up and Starter
(crank).
5
STEP
MODE 1 -
LOCK
MODE 2 -
UNLOCK
MODE 3 -
START (3 SECONDS)
MODE 4 -
TRUNK (3 SECONDS)
MODE 5 -
TRUNK
MODE 6 -
TRUNK
mode (X).
MODE 4
White (+)Start
Orange (+)Ignition2
Pink (+)Ignition
Yellow (+)Start2
Unlock and relock
after shut-down.
Doorlock Output at
Ignition only.
Single 2.5 sec
Passive arm
30 seconds (by
default if MODE 2 ot
3 is activated.
Antenna LED
disabled with ignition.
Siren only
Arm pulse only when
the
alarm is disarm.
c/5
1.5 hours at -5
c/5
o
o
minutes
Enable
No delay between
Ignition power up and
Starter (crank).
6
STEP
LOCK
UNLOCK
Turn the Ignition off
to exit program-
ming.
The parklights will
fl ash 4 times.
MODE 5
MODE 6
Decrease
crank time
Relock 10 sec.
after shut-down.
Single 0.75
Single 1.5 sec
sec
Passive arm
Passive arm
120 seconds.
60 seconds. (if
(if MODE
MODE 2 ot 3 is
2 ot 3 is
activated.
activated.
Cold time OFF

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents