Advertisement
05. Connectors for inspection and precautions for
use
Connectors for inspection is ideal for inspection of module units and inspection
during the device assembly process.
■ Modification from standard type
1, Contact portion: Ni plating on base, Au plating on surface
→Ni plating on base, PdNi＋Au flash plating on surface
2, The less retention force of simple lock reduces plating wearing out against the
lock portion.
（The mated connectors should be treated with special attention.）
①Insertion and removal life: 3000 times note)*
*with recommended insertion and removal
Surface treatment（contact portion）：
Ni plating on base, PdNi+Au flash plating on surface
improves wear-resistant.
*Insertion and removal life of standard type: 30 times
*Recommended insertion and removal:
Repeated insertion and removal speed of max.200times/hours
Socket for inspection
Header for inspection
Ordering Connectors for inspection usage
Please order with the following part no.
Characteristics
Without positioning
Socket
Notes) The number of contacts is in ○○ part.
Notes) Connectors with positioning bosses are available.
Please contact us for more details.
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors A4S
PdNi+Au Flash
PdNi+Au Flash
Part no.
AXE5E○○26 Header
bosses
- 22 -
improves wear-resistant.
②No simple lock makes mating and unmating works easy
Standard socket
Without simple lock
construction
Socket for inspection
Characteristics
Without positioning
bosses
©
Panasonic Corporation 2015
Standard header
Header for inspection
Part no.
AXE6E○○26
Order unit: Min. 50 pcs/lot
3,000 pcs/reel
ACCTF6E-2 201506
Advertisement
