Introduction
Intended use
This product is intended for optimizing
the power consumption by performing an
automatic load balancing between the
Easee Charging Robot(s) and the building.
It avoids overload and power interruption
while charging the electric vehicle (EV). In
the event of unstable or non operational
WiFi the device has a redundant
Easee Link RF
connection. Easee Link
TM
via radio may be limited by walls, concrete
or other obstacles.
The product needs to be paired with
a Charging Robot and connected to a
compatible smart meter with the cable
provided. In order for the Equalizer to work,
the smart meter's communication port
in most cases needs to be activated. The
Equalizer supports several smart meters.
Find a full list of compatible meters at
easee.support.
The product may only be operated with the
approved operating parameters and under
the specified environmental conditions
(-20 °C to +50 °C). Do not use the product if
it is damaged or does not function properly.
Uses other than those specified here are not
permitted.
What is included?
Equalizer
Magnetic backside
Touch button
LED
Cable
Wall mounting kit
For non-metallic surfaces
x1
x1
3
Need help?
Do you have a question about the Equalizer and is the answer not in the manual?