MSI Wind Board 330 Manual page 21

MS-7314 Mainboard
Fan Power Connectors: SYS_FAN1/ SYS_FAN2
The fan power connectors support system cooling fan with +12V. When connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to GND.
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with
®
Intel Front Panel I/O Connectivity Design Guide.
PIN SIGNAL
1 MIC_L
2 GND
3 MIC_R
4 NC
5 LINE out_R
6 MIC_JD
7 Front_JD
8 NC
9 LINE out_L
10 LINEout_JD
En-12
SYS_FAN1
JAUD1
2
1
Pin Definition
DESCRIPTION
Microphone - Left channel
Ground
Microphone - Right channel
Analog Port - Right channel
Jack detection return from front panel microphone JACK1
Jack detection sense line from the High Definition Audio CODEC
jack detection resistor network
No control
Analog Port - Left channel
Jack detection return from front panel JACK2
SENSOR
+1 2V
GND
SYS_FAN2
10
9