Power Supply - MSI Wind Board 330 Manual

Power Supply

ATX 20-Pin Power Connector: ATX1
This connector allows you to connect to an ATX power supply. To connect to the ATX
power supply, make sure the plug of the power supply is inserted in the proper
orientation and the pins are aligned. Then push down the power supply firmly into the
connector.
10
1
ATX1
ATX 4-pin Power Connector: JPW1
This power connector is used to provide power to the CPU.
JPW1
Important
1. For more information on compatible components, please visit http://global.
msi.com.tw/index.php?func=testreport
2. Make sure that all the connectors are connected to proper ATX power
supplies to ensure stable operation of the mainboard.
3. Power supply of 400 watts (and lower) is strongly recommended for system
stability.
Pin Definition
20
PIN SIGNAL
1 3.3V
2 3.3V
3 GND
4 5V
5 GND
6 5V
7 GND
8 PW_OK
11
9 5V_SB
10 12V
1 3
2 4
PIN SIGNAL
11 3.3V
12 -12V
13 GND
14 PS_ON
15 GND
16 GND
17 GND
18 -5V
19 5V
20 5V
Pin Definition
PIN SIGNAL
1 GND
2 GND
3 12V
4 12V
En-7