Support During Installation And Operation Of The Tachograph - Bosch Intellic EFAS-4.10 Workshop Manual

 26/04/2020 15:25 (UTC)
-----------------------
SrvId
------------------------
25/04/2020 - 26/04/2020
------------------------

26/04/2020 10:34
31
S41
--------------------
########################

26/04/2020 10:33
########################
--------------------
! 26/04/2020 10:32
31
S41
--------------------
! 26/04/2020 10:04
!11 S124
--------------------
! 26/04/2020 09:02
!03 S10
...
-----------------------
SrvId: 
 (1)
S10
 (2)
S41
S124  (1)
...
12.5

Support during installation and operation of the tachograph

With the help of the EFAS Service Tool, a support file can be created from the tachograph via the function Create Support-File....
This file helps the Intellic support team to solve your problem efficiently.
To create this support file, please proceed as follows:
1. Start EFAS Service Tool on your PC and connect it to the EFAS.
2. Press the F5 function key or select the Create Support File... function from the Tools menu.
3. In the PIN dialog box, enter the PIN received from the intellic support team and choose OK.
4. If the creation of the support file was successfully completed, the corresponding folder can be opened or displayed via
the active button Open Output Folder in Explorer ...
5. Send the ZIP file created in the output folder to the intellic support team.
The ZIP file is created in the format {VRN name}_support_file.ZIP.
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
Printout type
If a printout period has been defined, it is printed here.
Pictogram; start time of event/fault.
EFT (hex); SrvId; Duration
00h01
Marker for last SrvId printout. If no time stamp is known, no marker is printed.
SrvId S41 was detected for 2 minutes.
00h02
SrvId S124 is still active (--h--)
--h--
--h--
Total SrvIds within the print period and in the archive
78