Advertisement
7.
Lay the seat/back assembly from Step 5/6 on its side. Fix the assembly from
Step 1 to the seat/back assembly. Start by hand-tightening the two bolts (hardware
c) in the back leg. Next, hand-tighten the two bolts in the front leg. Then, hand-
tighten the two bolts through the middle back support up into the arm. Finally,
mechanically tighten all six bolts.
8.
Lay the assembly from Step 7 on its opposite side and repeat the process to
attach the opposite leg/arm assembly to the chair.
9.
Insert one tenon of part H into
one of the front legs. Applying some
pressure, flex the front leg to insert
the opposite end of part H into its
slot. Fasten using 2 of Hardware a.
4
c
x6
T25
a
x2
H
T20
(Back and seat base not
shown for clarity)
CO-0400 Assembly
Advertisement
