Gateway Management - ABB COM600 Series Operator's Manual

COM615 3.1
3.2.
12
COM600 Station Automation Series
Operator's Guide
A project can have one Gateway configuration.

Gateway management

The Gateway Management tool enables you to transfer the configurations of the objects
to the COM600 computer.
To be able to use the Gateway Management Tool, the engineering computer must be
connected to the COM600 computer. The IP address of the used ethernet port in the
COM600 computer must be entered to the corresponding Gateway object property. For
more information, see COM600 User's guide.
To open the Gateway Management tool, right-click the Gateway object in Communication
Engineering Tool (CET) and select Management. To transfer and activate the configur-
ation, click the respective buttons, see Figure 3.2-1:
• To copy the configurations of all servers and clients to the Gateway computer, click
Update configuration.
•
To restart all servers and clients with the latest configurations, click Reload config-
uration.
•
To transfer only the changed configurations and to restart only the changed server
or client with new configurations, click Update & reload configuration.
1MRS756123