Communication Structure - ABB COM600 Series Operator's Manual

COM615 3.1
4.5.2.
26
COM600 Station Automation Series
Operator's Guide

Communication structure

You can open the communication view of HMI by clicking on the Communication tab
on the left. The communication structure is displayed in the window on the left. In the
communication structure you can see the OPC Server, communication channel objects
and the IEDs.
You can see the status of the IEDs in the communication structure. If there is a problem
in communication, there is a red cross next to the IED.
Figure 4.5.2-1 The communication view to HMI
Device and diagnostics information
By clicking on the computer name at the top of the structure, you can see its device
information, such as the hardware and software versions, in the window on the right side
of the tree. By clicking on the OPC Server object name, corresponding device information
is displayed on the right. You can view device diagnostics information of the whole
subnetwork by clicking on the subnetwork object. To see the communication status or
diagnostic counter information of individual devices, click on the IED objects.
1MRS756123
communication_view.jpg