Using The Cd Display; Labelling A Cd; Disc Memo - Sony CHC-CL5MD Operating Instructions Manual

Using the CD display

Press DISPLAY repeatedly.
When a CD TEXT disc is loaded, you can
check the information recorded on the disc,
such as the titles. The display changes
cyclically as follows:
During normal play
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the CD ("1 DISC" mode) or
"- -.- -" display ("ALL DISCS" mode) t
Track title of the current track* t Clock
display t Effect name
In stop mode
CD stopped display t CD disc title* t Total
number of tracks and total playing time t
Clock display t Effect name
* If a CD that has no title is loaded, nothing appears.
When the CD contains more than 20 tracks, CD
TEXT is not displayed from track 21 on.
12

Labelling a CD

— Disc Memo

You can label up to 50 CDs with titles of up to
20 symbols and characters. Whenever you load
a labelled CD, the title appears in the display.
Notes
• You cannot label a CD for which "CD-TEXT"
appears in the display.
• When labelling CDs for the first time, be
sure to erase all disc titles stored in the
system memory (see "Erasing a disc title"
on the next page).
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press DISC SKIP on the remote
repeatedly until the desired CD
appears.
If "SHUFFLE" or "PGM" appears in the
display, press PLAY MODE/DIRECTION
repeatedly until both disappear.
3
Press NAME EDIT/CHARACTER on the
remote.
The cursor starts flashing.
4
Press NAME EDIT/CHARACTER on the
remote to select the desired type of
character.
Each time you press the button, the display
changes cyclically as follows:
(Blank space) t A (Upper cases) t a
(Lower cases) t 0 (Numbers) t '
(Symbols)
5
Turn ./> (or press . or > on
the remote) to select the desired
character.
To enter a blank space
Press M.
To enter a symbol
You can use the following symbols.
' – / , . ( ) : ! ? & + < > _ = " ; # $ % @ `